Subject: All American Cube
"Mike, got bored and decided to express my patriotism via my Cube G4/450, CDRW GeForce 2X, 40 GB 7200 Maxtor, and 512 MB RAM. I simply downloaded the flag from macdesktops.com "New Glory", printed it out, cut and tape. (just taped it to the inner liner with transparent tape.)

[I asked for more details and he wrote]

I removed the inner shell of the Cube which is held in place by phillips and torx #8 screws. [Note - A T9 driver fits the screws on my G4 Cube case far better-Mike]
please look at the attached photos that show the removed inner shell with the Flag print tapped on. Other photo shows the outer shell next to the completed inner shell.
The res [of the New Glory image] was 1280x1024 but made to fit on a 8.5x11" paper
William Rivas "

Although I didn't apply the image to the top, I did do the sides on a spare (extra) G4 Cube housing I had. Here's a photo of the results-Mike:

I welcome other Cube owner reports on customized housings.

Other Cube Related Articles:

• Cube section of the Mac Models page here
• My Review of GigaDesigns' G4/1GHz-1.2GHz CUBE CPU Upgrade (Late Jan 2004)
• Cube Mods to fit Radeon 8500 AGP card
• Underclocking a PC GeForce 2MX Graphics Card For use in a G4 Cube without a Fan.
• Review of PL 1GHz CPU Upgrade for Cube
• Dual G4 500 Cube Using Sonnet Duet CPU Upgrade Module (I did this upgrade also - still have the cube w/dual G4 500 installed)
• Dual G4 450 Cube Modifications
• Maxtor 100GB Hard Drive in Cube Tests